BP110UVFR-S4M Fireye Burner Control

Overview

The Fireye BP110UVFR-S4M BurnerPRO is a compact, microprocessor-based primary flame safeguard control system. It is designed to provide automated burner sequencing, ignition, and continuous flame monitoring for on-off, multi-stage, or modulating burners used in commercial heating and process equipment. This specific model features Series 4 timings and includes integrated Modbus RTU communications for remote monitoring and system integration. It is uniquely engineered with two built-in amplifiers, supporting UV only, Flame Rod (FR) only, or combined UV+FR applications.

Features

• Microprocessor-based control for precise burner sequencing and diagnostics.
• Dual built-in amplifiers (UV and FR) for maximum application flexibility.
• Integrated Modbus RTU communications for data access and remote monitoring.
• Non-volatile lockout capability ensures safety status is maintained after power loss.
• Smart LEDs provide real-time operating status and detailed diagnostic lockout information.
• Run/Check feature allows operators to pause the program sequence for system troubleshooting.
• High-capacity relay contacts for direct control of burner components.
• Compatible with 60-2981-1 and Siemens LFL wiring bases for easy retrofitting.

Specifications

• Model: BP110UVFR-S4M
• Supply Voltage: 110 VAC (+20% / -15%), 50/60 Hz
• Power Consumption: 7 VA
• Flame Failure Response Time (FFRT): 1 second
• Operating Temperature: -40 degree C to +60 degree C (-40 degree F to 140 degree F)
• Protection Category: IP40 (indoor use)
• Humidity: 90% R.H. non-condensing
• Weight: 2.5 lbs (1.13 kg)
• Dimensions: 4.0 inches L x 4.0 inches W x 4.4 inches H (without base)

Applications

The BP110UVFR-S4M is ideally suited for commercial and industrial combustion systems firing either oil or gas fuels. When used with a UV scanner (such as UV90L, UV1AL, or UV5), it is rated for non-permanent operation requiring a manual recycle every 24 hours. When utilized with an ionization flame rod (69ND1), it supports permanent, continuous operation. It is commonly used in applications requiring integrated Modbus communication and compatibility with existing Siemens LFL wiring infrastructures.