BP110UVFR-S3M Fireye Burner Control

Overview

The Fireye BP110UVFR-S3M BurnerPRO is a compact, microprocessor-based primary flame safeguard control system. It is designed to provide proper burner sequencing, ignition, and flame monitoring for on-off, multi-stage, or modulating burners. This specific model features Series 3 timings and integrates both UV and Flame Rod (FR) amplifiers, offering high flexibility for various industrial and commercial combustion applications. It serves as a modern, drop-in replacement for Siemens LFL style controllers and is compatible with the 60-2981-1 wiring base.

Features

• Dual built-in amplifiers supporting UV only, FR only, or UV+FR applications.
• Integrated Modbus communication and Valve Proving (VP) functionality.
• Non-volatile lockout capability ensuring safety even after power loss.
• Seven SMART LEDs providing real-time operating status and diagnostic information.
• Run/Check feature allowing operators to pause the program sequence for troubleshooting.
• Remote and local reset capabilities.
• Safety self-test performed automatically on every start cycle.
• High-capacity relay contacts for reliable control of burner components.

Specifications

• Model Number: BP110UVFR-S3M
• Supply Voltage: 110 VAC (+20%, -15%), 50/60 Hz, single phase
• Power Consumption: 7 VA
• Operating Temperature: -40 degree C to +60 degree C (-40 degree F to 140 degree F)
• Humidity: 90% RH (Non-condensing)
• Protection Category: IP40 (except wiring base)
• Weight: Approximately 2.5 lbs (1.13 kg)
• Compatible Scanners: UV90L, UV1AL, UV5 (for UV); 69ND1 ionization rod (for FR)

Applications

The BurnerPRO BP110UVFR-S3M is ideally suited for commercial and industrial heating systems firing oil or gas fuels. It is commonly used in boiler rooms and process heat applications where integrated burner management and flame safety are required. Because its FR amplifier is permanently self-checking, it is suitable for applications requiring continuous burner operation (longer than 24 hours), while the UV monitoring mode is designed for non-permanent operation requiring a recycle every 24 hours.