BP110UVFR-S5MP Fireye Burner Control

Overview

The Fireye BP110UVFR-S5MP BurnerPRO is a compact, microprocessor-based primary flame safeguard control system designed for single-burner applications. It provides automated burner sequencing, ignition, and continuous flame monitoring for commercial heating and process equipment. As an integrated solution, this model features built-in Modbus communication and Valve Proving (VP) functionality. It is specifically engineered as a modern, non-volatile replacement for electromechanical controls, including compatibility with Siemens LFL wiring bases.

Features

• Integrated Valve Proving (VP) system to check for leakage through safety shutoff valves.
• Built-in Modbus RTU communication for remote monitoring and data access.
• Dual-amplifier design supporting both Ultraviolet (UV) non-self-check scanners and Flame Rod (FR) detection.
• Non-volatile lockout capability ensures safety status is maintained even after power loss.
• Smart LED interface providing real-time operating status, flame quality, and diagnostic codes.
• Run/Check feature allowing operators to pause the program sequence for system troubleshooting.
• High-capacity relay contacts for direct control of burner components.
• Real-time internal diagnostics for enhanced safety integrity.

Specifications

• Model Number: BP110UVFR-S5MP
• Supply Voltage: 110 VAC (+20%, -15%) at 50/60 Hz.
• Power Consumption: 7 VA.
• Timing Series: Series 5 (typically 30s purge, 4s FFRT).
• Temperature Rating: -40 degree C to +60 degree C (-40 degree F to 140 degree F) operating range.
• Protection Category: IP40 (indoor use).
• Dimensions: 4.15 x 4.15 x 5.0 inches (with wiring base).
• Weight: 2.5 lbs (1.13 kg).
• Compatibility: Fits 60-2981-1 and Siemens LFL wiring bases.

Applications

The BP110UVFR-S5MP is used in commercial and industrial combustion systems firing gas or oil fuels. It is suitable for non-permanent operations requiring at least one burner recycle every 24 hours when used with UV sensors, and permanent operation when using a flame rod. Common applications include process burners, boiler systems, kilns, duct burners, and incinerators where advanced diagnostics and valve leakage testing are required for safety compliance.