BP110UVFR-S1MP Fireye Burner Control

Overview

The Fireye BP110UVFR-S1MP BurnerPRO is a compact, microprocessor-based flame safeguard control designed for the sequencing, ignition, and continuous monitoring of single-burner commercial heating and industrial process equipment. This specific model features integrated dual amplifiers for both Ultraviolet (UV) and Flame Rod (FR) sensors, enabling versatile flame detection. It is equipped with Modbus communication capabilities and a built-in valve proving system to ensure safety by checking for gas leakage through the shutoff valves. As a modern replacement for electro-mechanical controls, it is functionally compatible with Siemens LFL wiring bases, allowing for straightforward retrofitting without external wiring changes.

Features

• Integrated UV and FR amplifiers allow for UV-only, FR-only, or combined UV+FR flame monitoring applications.
• Built-in Valve Proving Feature (VP) automatically checks for leakage through safety shutoff valves during start-up or shutdown.
• Modbus RTU communication allows for remote monitoring and integration into building management systems.
• Series 1 factory-set timings provide specific sequences for burner operations.
• Eight SMART LEDs provide real-time diagnostic information, including operational status and specific lockout fault codes.
• Run/Check feature allows operators to pause the program sequence at key stages (Purge, Ignition, PTFI, MTFI) for troubleshooting.
• Non-volatile lockout memory ensures the control remains in a safe state even after a power loss.
• Rugged IP40-rated housing suitable for demanding industrial environments.

Specifications

• Model Number: BP110UVFR-S1MP
• Supply Voltage: 110 VAC (+20%, -15%) 50/60 Hz
• Power Consumption: 7 VA
• Flame Failure Response Time (FFRT): 1 second
• Operating Temperature: -40 degree F to 140 degree F (-40 degree C to 60 degree C)
• Protection Category: IP40
• Compatible Scanners: UV90L, UV1AL, UV5 (for UV); 69ND1 (for FR)
• Timing Series: Series 1
• Dimensions: 4.0 inches L x 4.0 inches W x 4.4 inches H (without base)
• Weight: Approximately 2.5 lbs (1.13 kg)

Applications

The BP110UVFR-S1MP is designed for use with on-off, multi-stage, or modulating burners firing gas or oil fuels. It is widely applied in commercial boiler operations, kilns, and ovens. Its permanent self-checking FR amplifier makes it suitable for continuous-operation applications (running more than 24 hours), while its compatibility with existing Siemens LFL wiring bases makes it an ideal solution for retrofitting older combustion systems. It is also highly effective for multi-burner configurations where space and flexibility are prioritized.