VG7241ET Johnson Controls Valve

Installation Guide

Datasheet

Catalog Page

The Johnson Controls VG7241ET Valve 2-W PDTC DN15

Features

• DN15 through DN50 bronze valves, in two-way PDTC, PDTO and three-way mixing configurations

• Wide range of electric actuators available for all valves

• Every valve tested for tight shutoff

• Uses Standard Johnson Controls U-cup Packing

• Flexible features-and-options ordering template

• Standard bonnet and stem design

• Leakage: Brass trim 0.01% of maximum flow per EN60534-4, Class IV; Stainless steel trim 0.05% of maximum flow

• Inherent flow characteristics: Equal percentage 2-way valves; Linear 3-way valves in compliance with EN 600534

• Rangeability: 25:1 at 0.25…1 KVS and 100:1 at 1.6…40 KVS. In accordance with EN 60534-2-4

• Maximum recommended operating pressure drop 240 kPa for DN15 and DN32 – 200 kPa for DN40 to DN50

• Fluid temperature operating limits Valves with brass trim and V-3801 and VA-731x Actuators: 2 °C to 120 °C water /100 kPa Saturated Steam

• Fluid temperature operating limits Valves with brass trim and all other actuators: 2 °C to 140 °C water /260 kPa Saturated Steam

• Fluid temperature operating limits Valves with stainless steel trim: 2 to 170 °C /690 kPa Saturated Steam