T-5210-1001 Johnson Controls Transmitter

Overview

The Johnson Controls T-5210-1001 is a direct-acting pneumatic temperature transmitter designed to measure temperature and convert it into a proportional air pressure signal. This signal is transmitted to pneumatic receivers, controllers, or receiver-indicators within commercial and industrial HVAC systems. It incorporates pneumatic feedback to ensure an exact proportional relationship between the measured temperature and the transmitted signal, and features a bimetal element to compensate for ambient temperature effects.

Features

• Direct-acting pneumatic temperature transmitter with a remote copper bulb sensing element.
• Incorporates pneumatic feedback for high linearity and an exact proportional relationship between measurement and signal.
• Features a ball-type control port for increased accuracy and a reinforced lever for enhanced linearity.
• Built-in bimetal element compensates for ambient temperature effects.
• Includes an integral hypodermic needle test point for straightforward calibration check and verification.

Specifications

• Operating Temperature Range: 50 to 100°F (10 to 38°C)
• Element Temperature Range: -40 to 230°F
• Capillary Length: 5-1/2 inch (140 mm) copper capillary
• Output Pressure Range: 3 to 15 psig
• Supply Pressure: 20 psig nominal (25 psi maximum)
• Air Consumption: 45 SCIM (Standard Cubic Inches per Minute)
• Restriction Requirement: Requires a 0.007 inch restricted supply

Applications

• Commercial building HVAC pneumatic control systems
• Air handling unit (AHU) temperature sensing and control
• Industrial process temperature monitoring
• Integration into legacy pneumatic control panels and DDC systems