SMDK-1004 Fireye DISPLAY Kit

Overview

The Fireye SMDK-1004 is a portable, palmtop serviceman’s display kit designed to facilitate the installation, operation, and maintenance of the MicroM series Flame Safeguard Controls. This comprehensive tool provides an interface for technicians to monitor burner status, access historical data, and configure system parameters directly on-site. The kit consists of an ED510 alphanumeric display module with a backplate, a MED2 remote daughter board, and an ED580-4 interconnecting cable.

Features

• Backlit LCD display with 2 lines of 16 characters for clear visibility in various lighting conditions.
• Integrated keypad featuring Scrl, Reset, and Mode keys for easy navigation and system control.
• Provides real-time burner status and first-out annunciation to identify the cause of lockout conditions.
• Comprehensive history tracking of the last six lockout events, including cycle and hour time stamps.
• Ability to monitor total burner hours, burner cycles, and system hours.
• Diagnostic sub-menus for program setup, system information, and average flame signal values.

Specifications

• Display Type: Backlit LCD (2×16 alphanumeric)
• Interface: Portable palmtop with 3-key keypad
• Components: ED510 Display, MED2 Daughter Board, ED580-4 Cable
• Cable Length: 4 feet (standard in kit)
• Shipping Weight: Approximately 0.87 lbs to 3 lbs depending on packaging
• Dimensions: Approximately 10 x 6 x 5 inches
• Compatibility: Designed specifically for Fireye MicroM Flame Safeguard Controls

Applications

The SMDK-1004 is used by HVAC technicians and industrial boiler operators for the initial setup and commissioning of MicroM combustion control systems. It is also an essential diagnostic tool for troubleshooting intermittent faults and performing routine maintenance by retrieving operational history and current performance data. It is commonly employed in commercial and industrial burner management applications where detailed status information is required for safety and efficiency.