EP300F Fireye Programmer

Overview

The Fireye EP300F is a plug-in programmer module used with the FLAME-MONITOR Burner Management Control System (E100 and E110 chassis). It provides automated sequencing for burner start-up, flame monitoring, and safety shut-off. This specific model features a French-language interface for system interaction and is designed for applications requiring selectable purge timings and recycle functions without modulator motor circuitry.

Features

• Provides start-up programming, safe-start checks, and continuous flame monitoring supervision.
• Selectable purge timing with a minimum setting of 30 seconds.
• Selectable recycle or non-recycle operation modes via internal dipswitches.
• 4-second Flame Failure Response Time (FFRT) for rapid safety shutdown.
• Non-modulating design, functioning without a modulator motor circuit.
• Integrated RJ45 connector for interfacing with ED510 display modules.
• Stores burner cycles, run time, and lockout history for diagnostic purposes.

Specifications

• Manufacturer: Fireye
• Model Number: EP300F
• Voltage: 120V (+10%, -15%), 50/60 Hz
• Temperature Range: -40°F to 125°F (-40°C to 50°C)
• Trial for Ignition (TFI): Selectable 5 and 10 seconds
• Operating Language: French
• Flame Failure Response Time: 4 seconds maximum
• Shipping Weight: 0.5 lbs (approximately 0.23 kg)
• Humidity: 85% R.H. non-condensing

Applications

The EP300F is primarily used in commercial and industrial combustion systems to manage burner sequencing. It is compatible with Fireye E100 and E110 Flame-Monitor chassis and is suitable for systems monitoring gaseous or light oil fuels. It is commonly applied in heating, ventilation, and air conditioning (HVAC) environments where French-language diagnostics and non-modulating control are required for safety and operational oversight.