BP230UVFR‑S2MP Fireye Burner Control

Overview

The Fireye BP230UVFR-S2MP BurnerPRO is a compact, microprocessor-based primary flame safeguard control system. It is designed to provide automated burner sequencing, ignition, and continuous flame monitoring for commercial heating and industrial process equipment. This specific model features integrated Modbus communication and Valve Proving (VP) logic, and it is engineered as a plug-and-play replacement for Siemens LFL series controllers, utilizing the same wiring base.

Features

• Integrated Valve Proving (VP) and Modbus communication protocols for advanced system monitoring and leak testing.
• Dual-amplifier design supporting both Ultraviolet (UV) non-self-check scanners and Flame Rectification (FR) ionization rods.
• Series 2 pre-programmed operational timings for precise burner sequencing.
• Seven Smart LEDs providing real-time operating status, flame signal quality, and diagnostic lockout information.
• Run/Check feature allowing operators to pause the program sequence during Purge, Ignition, PTFI, or MTFI for troubleshooting.
• Non-volatile lockout capability ensuring safety status is maintained even after power loss.
• Proof of closure (POC) and air-flow proving inputs for enhanced safety integrity.

Specifications

• Supply Voltage: 230 VAC (+10%, -15%) 50/60Hz.
• Power Consumption: 7 VA.
• Flame Failure Response Time (FFRT): 1 second.
• Protection Category: IP40 (standard version).
• Operating Temperature: -40 degree C to +60 degree C (-40 degree F to 140 degree F).
• Humidity: 90% R.H. non-condensing.
• Dimensions: 4.15 inches L x 4.15 inches W x 5.0 inches H (with base).
• Shipping Weight: Approximately 2.5 lbs (1.13 kg).
• Compliance: Designed for non-permanent operations requiring at least one burner recycle every 24 hours.

Applications

The BP230UVFR-S2MP is utilized in commercial and industrial combustion systems firing oil or gas fuels. It is ideally suited for applications such as process burners, pilot burners, duct burners, and industrial kilns. Its compatibility with Siemens LFL wiring bases makes it a preferred choice for retrofitting and upgrading legacy flame safeguard systems in boiler rooms and heat treatment facilities.