BP230UV-S3 Fireye Burner Control

Overview

The Fireye BP230UV-S3 BurnerPRO is a compact, microprocessor-based primary flame safeguard control system designed to provide proper burner sequencing, ignition, and continuous flame monitoring for on-off, multi-stage, or modulating burners. This specific model features Series 3 timings and is equipped with a built-in ultraviolet (UV) non-self-check amplifier. It is engineered for use in non-permanent operations that require a burner recycle at least once every 24 hours. The BP230UV-S3 is a “plug and play” replacement for select Siemens LFL control models, allowing for easy retrofit using existing wiring bases without external changes.

Features

• Microprocessor-based design for precise timing and sequencing.
• Seven SMART LEDs provide real-time operating status and diagnostic lockout information.
• Non-volatile lockout capability ensures safety status is maintained even after power loss.
• Built-in UV amplifier compatible with Fireye UV90L, UV1AL, and UV5 scanners.
• Integrated safety features including air-flow proving and proof of fuel valve closure (POC).
• Run/Check feature allows operators to stop the program sequence for system troubleshooting.
• High-capacity relay contacts for reliable switching of burner components.
• Remote and local reset capabilities.

Specifications

• Model Number: BP230UV-S3
• Supply Voltage: 230 VAC (+10%, -15%) 50/60Hz
• Power Consumption: 7 VA
• Flame Failure Response Time (FFRT): 1 second
• Operating Temperature: -40 degrees C to +60 degrees C (-40 degrees F to 140 degrees F)
• Humidity: 90% RH (non-condensing)
• Protection Category: IP40 (except wiring base)
• Purge Time (Series 3): 37 seconds
• Dimensions: 4.0 inches L x 4.0 inches W x 4.4 inches H (without base)
• Shipping Weight: 2.5 lbs (1.13 kg)

Applications

The BurnerPRO BP230UV-S3 is designed for commercial heating and process equipment applications firing oil or gas fuels. It is commonly used in steam or hot-water generating boilers of small to medium size. Specific application environments include process burners, pilot burners, duct burners, industrial gas burners, refinery applications, low NOx burners, waste gas units, and incinerators. It is particularly well-suited for retrofitting existing Siemens LFL1.335 installations.