BP110UVFR-S6M Fireye Burner Control

Overview

The Fireye BP110UVFR-S6M is a compact, microprocessor-based BurnerPRO primary flame safeguard control system. It is designed to provide proper burner sequencing, ignition, and continuous flame monitoring for on-off, multi-stage, or modulating burners used in commercial heating and process equipment. This specific model features integrated Modbus RTU communications and dual built-in amplifiers, allowing for flexible flame detection using either ultraviolet (UV) scanners or flame rods (FR).

Features

• Microprocessor-based control for precise burner sequencing and ignition timing.
• Integrated Modbus RTU communications for remote monitoring and data acquisition.
• Dual built-in amplifiers supporting UV, FR, or combined UV+FR flame detection applications.
• Seven SMART LEDs provide real-time operating status, flame quality, and lockout information.
• Safety self-test performed on every start to ensure proper operation and prevent unsafe ignition.
• Drop-in replacement compatibility for Siemens LFL series wiring bases.
• IP40 protection rating for the chassis.

Specifications

• Model Number: BP110UVFR-S6M
• Supply Voltage: 110 VAC (+20%, -15%) 50/60Hz
• Power Consumption: 7 VA
• Timings: Series 6 factory-set timings
• Operating Temperature: -40 degree C to +60 degree C (-40 degree F to 140 degree F)
• Humidity: 90% R.H. non-condensing
• Compatibility: Supports UV90L, UV1AL, and UV5 scanners; 69ND1 flame rods; compatible with 60-2981-1 and Siemens LFL wiring bases.
• Weight: Approximately 2.5 lbs (1.13kg)

Applications

The BP110UVFR-S6M is ideally suited for single-burner commercial and industrial combustion systems firing oil or gas fuels. Typical applications include process burners, pilot burners, duct burners, and low NOx burners used in small to medium-sized boilers, refinery equipment, and incinerators. When operated as a UV control, it is intended for non-permanent operation requiring a burner recycle at least once every 24 hours.