BP110UVFR-S5 Fireye Burner Control

Overview

The Fireye BP110UVFR-S5 BurnerPRO is a compact, microprocessor-based primary flame safeguard control designed for single-burner commercial heating and process equipment. It provides automated burner sequencing, ignition, and continuous flame monitoring for systems firing oil or gas fuels. This specific model is engineered as a functional replacement for Siemens LFL series controls, allowing it to mount directly into the same wiring base without requiring external wiring changes. The BP110UVFR-S5 features Series 5 timings (equivalent to S3 timings with a 4-second Flame Failure Response Time) and includes integrated amplifiers for both ultraviolet (UV) and flame rod (FR) detection.

Features

• Designed as a drop-in replacement for Siemens LFL1.322-110v wiring bases
• Integrated dual amplifiers support UV scanners, flame rods, or a combination of both
• Seven smart LEDs provide real-time operating status and detailed diagnostic lockout information
• Non-volatile lockout capability ensures safety by maintaining status even after a power loss
• Run/Check feature allows operators to pause the program sequence for system troubleshooting and commissioning
• Built-in proof of fuel valve closure and air-flow proving logic
• Rugged IP40-rated housing suitable for industrial environments
• Remote and local reset capabilities

Specifications

• Model Number: BP110UVFR-S5
• Supply Voltage: 110 VAC (+20%, -15%), 50/60 Hz
• Power Consumption: 7 VA
• Flame Failure Response Time (FFRT): 4 seconds
• Timing Series: Series 5 (S3 timings)
• Operating Temperature: -40 degrees C to +60 degrees C (-40 degrees F to 140 degrees F)
• Humidity: 90% R.H. non-condensing
• Protection Category: IP40
• Dimensions: 4.0 x 4.0 x 4.4 inches (without wiring base)
• Weight: 2.5 lbs

Applications

The BP110UVFR-S5 is intended for non-permanent operation requiring at least one burner recycle every 24 hours. It is commonly used in:

• Commercial and industrial boilers (small to medium-sized)
• Process burners and duct burners
• On/off, multistage, or modulating burner systems
• Retrofit projects replacing legacy Siemens LFL controls
• Heating equipment utilizing natural gas, propane, or light oil fuels