BP110UVFR-S12M Fireye Burner Control

Overview

The Fireye BP110UVFR-S12M is a compact, microprocessor-based BurnerPRO primary flame safeguard control system designed for single burner applications. It provides essential burner sequencing, ignition, and continuous flame monitoring for commercial heating and process equipment. This specific model is engineered as a drop-in replacement for Honeywell RM7800 series controls when used with the 60-2991-1 wiring adapter, allowing for system upgrades without total rewiring. It features dual integrated amplifiers, supporting both ultraviolet (UV) and flame rod (FR) detection.

Features

• Microprocessor-based design for precise timing and sequencing.
• Dual built-in amplifiers supporting UV, FR, or combined UV+FR flame detection.
• Non-volatile lockout capability ensures safety status is retained through power cycles.
• Integrated Modbus RTU communication via RS485 for remote monitoring and data access.
• Eight SMART LEDs provide real-time diagnostic information and fault codes.
• Run/Check feature allows manual pausing of the sequence for troubleshooting.
• Support for air-flow proving, gas valve proving, and remote reset.

Specifications

• Supply Voltage: 110 VAC (+20%, -15%) 50/60 Hz.
• Power Consumption: 7 VA.
• Default Timings: Purge = 30 sec, PTFI = 10 sec, MTFI = 15 sec.
• Temperature Rating: -40 degree C to +60 degree C (-40 degree F to 140 degree F).
• Protection Category: IP40.
• Dimensions: 4.15 L x 4.15 W x 5.0 H (with base).
• Shipping Weight: Approximately 2.5 lbs (1.13 kg).
• Humidity: 90% R.H. (non-condensing).

Applications

The BP110UVFR-S12M is primarily used in commercial and industrial combustion systems firing oil or gas. It is specifically designed to replace legacy Honeywell RM7800 series controls in existing installations. When used with a UV scanner (such as UV90L or UV1AL), it is rated for non-permanent operation requiring a recycle every 24 hours. When utilized with a flame rod, it supports permanent (continuous) operation. It is suitable for on-off, multi-stage, or modulating burner configurations.