VG1241AD+9A4GGA Johnson Controls Valve / Actuator

Valve,Assembly, 1/2″, NPT, 0-10Vdc, 2-10Vdc, 24Vac,, 1.2 Cv Two-Way Equal Percentage Flow Forged Brass Body with Plated Brass Trim Non-Spring Return 4-20mA w/ 500 ohm resistor and 120″ Plenum Cable Actuated Ball Valve

SKU: VG1241AD+9A4GGA Category: Valves Brand: Johnson Controls

Datasheet

Installation Guide

Catalog Page

The Johnson Controls VG1241AD+9A4GGA 1/2″ 2W Ball Valve 1.2CV; BRASS TRIM NON-SPR RET VA9104-GGA-2S NO Switch 0-10V PROPORTIONAL

VG1000 Series Ball Valves are designed to regulate the flow of hot or chilled water and, for some models, low pressure steam in response to the demand of a controller in HVAC systems. Available in sizes 1/2 through 2 in. (DN15 through DN50), this family of two- and three-way forged brass valves is factory or field mounted to Johnson Controls® VA9104 and VA9300 Series Non-Spring Return and VA9203 and VA9208 Series Spring Return Electric Actuators for on/off, floating, or proportional control. For sweat and press end connection valves supplied with an actuator, the actuator is not mounted to the valve to allow access to the end connections.