VA-7010-8001 Johnson Controls Valve Actuator

Overview

The Johnson Controls VA-7010-8001 is a low-voltage electric valve actuator designed to provide two-position (open/closed) control. It mounts easily via a threaded coupling directly onto VG4000 and VG5000 series zone or forged brass valves without needing separate linkages. Featuring a synchronous stall-type motor, it ensures quiet operation and includes a manual operating lever for convenient servicing.

Features

• AC stall-type motor ensures quiet operation
• Manual lever allows manual position mode for easy servicing
• Flat profile design with small side clearance saves space and enables mounting close to flat surfaces
• Actuator can be mounted after the valve body is installed, simplifying installation in confined spaces
• Rotates after mounting to easily align the wiring conduit entry in any direction

Specifications

• Supply Voltage: 24 VAC, Class 2, ±10% at 50/60 Hz
• Power Consumption: 7 VA
• Minimum Force: 20.2 lb (90 N)
• Nominal Stroke: 0.12 in. (3 mm), maximum 0.2 in. (5 mm)
• Stroke Time: Nominal 10 seconds On, 5 seconds Off
• Enclosure Rating: IP40, NEMA 1
• Electrical Connections: 18 AWG, 20-inch long wire leads
• Operating Temperature: 35 to 122 degrees F (2 to 50 degrees C), non-condensing

Applications

• Designed for two-position (on/off) control in commercial HVAC and Building Automation Systems (BAS)
• Ideal for controlling fan coil units and zone valve applications when paired with Johnson Controls VG4000 and VG5000 series valves