TFB24 Belimo Damper Actuator

The Belimo TFB24 Damper Actuator,22 in-lb,Spring Return,24V,On/Off

Tech Sheet

Installation Guide

Application

For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. Control is On/Off from an auxiliary contact, or a manual switch. The actuator is mounted directly to a damper shaft from 1/4” up to 1/2” in diameter by means of its universal clamp, 1/2” shaft centered at delivery. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft.

Operation

The TF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque to the damper with, and without, power applied to the actuator. The TF series provides 95° of rotation and is provided with a graduated position indicator showing 0° to 90°. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. Power consumption is reduced in holding mode.

Safety Note: Screw a conduit fitting into the actuator’s bushing. Jacket the actuator’s input and output wiring with suitable flexible conduit. Properly terminate the conduit in a suitable junction box

Specifications

• Angle of Rotation
  • 95°
• Direction of Rotation (Fail-Safe)
  • Reversible with cw/ccw mounting
• Power Consumption (Holding)
  • 3 W
• Safety Function
  • YES
• Shaft Diameter
  • 1/4…1/2″ round
  • centers on 1/2″
• Actuator Type
  • Spring return
• Application
  • Air
• Control Type
  • On/Off
• Degree of Protection
  • IP42
  • NEMA 2
  • UL Enclosure Type 2
• Electrical Connection
  • Cable
• Power Consumption (Running)
  • 2 W
• Product Type
  • Actuator
• Protection category
  • IP42
• Running Time (Fail-safe)
  • <25 s
• Running Time (Motor)
  • 75 s
• Torque
  • 22 in-lb [2.5 Nm]
• Voltage AC/DC
  • AC/DC 24 V