TE-6311M-1 Johnson Controls Probe

Datasheet

The Johnson Controls TE-6311M-1 Duct Probe Sensor 8 INCH; 1000 OHM NICKEL – METAL Enclosure

The TE-6300 Temperature Sensor line provides economical solutions for a wide variety of temperature sensing needs, including wall mount, outdoor air, duct, strap-mount, well, duct averaging, and Variable Air Volume (VAV) flange mount duct probe applications. The TE-6300 line offers both a metal and a plastic enclosure for the most popular models.

Sensors are available in the following types:

• 1k ohm thin-film nickel
• 1k ohm nickel averaging
• 1k ohm thin-film platinum
• 100 ohm platinum equivalent averaging
• 1k ohm platinum equivalent averaging
• 2k (2,252) ohm thermistor
• 10k ohm thermistor, Johnson Controls® Type II

Each sensor is packaged with the necessary mounting accessories to maximize ordering and installation ease and reduce both commissioning time and cost. Refer to the TE-6300 Temperature Sensors Product Bulletin (LIT-216320) for important product application information.

Features

• full line of versatile sensors — supports all your temperature sensing needs from a single supplier: wall mount, outdoor air, duct probe, duct averaging, strap-mount, well insertion, and flange mount duct probe.
• single assembly ordering — simplifies ordering; provides a complete assembly in one box.
• models featuring an integral NPT Adaptor — increase sensor connection strength, eliminates the need for a special adaptor.
• models with a stainless steel sensor probe — protect the sensor while increasing corrosion resistance.
• metal enclosure (TE-63xxM Models only) — meets plenum requirements.
• models featuring a retainer for the sensor holder — lock the sensor holder into the conduit box.

All TE-6300 series sensors are two-wire, passive, resistance output devices.

TE-63xxM Models

The TE-63xxM (metal enclosure) models:

• come with a corrosion-protected steel enclosure with a 0.88 in. (22 mm) hole for a 1/2 in. conduit fitting
• include two hex-head self-drilling screws for mounting the duct and duct averaging models
• offer (well models only) either a direct mount or 1/2-14 NPT threaded well sensor holder for mounting in TE-6300W Series thermal wells (Order the thermal well separately.)
• provide optional well sensor holders (order separately) to mount duct models in thermal wells.
• meet UL 1995 plenum use requirements
• offer optional accessory kit (order separately) to replace plastic hole plug and wiring bushing to meet International Mechanical Code (IMC) requirements