MN7505A2001 Honeywell Damper Actuator
$228.30
Damper Actuator, NON-Spring RETURN, 44 LB-IN (5 NM), (0)2-10VDC & FLOATING Control, 24 VAC/DC -15% +20%, 50/60 HZ (N05010)
4 in stock
THE HONEYWELL MN7505A2001 Damper Actuator, NON-Spring RETURN, 44 LB-IN (5 NM), (0)2-10VDC & FLOATING Control, 24 VAC/DC -15% +20%, 50/60 HZ (N05010);
Non Spring Return Direct Coupled Actuator, 24Vac, 44 Lb-In Torque, 0/2-10Vdc, 4-20Ma with 500 Ohm Resister, On/Off, SPDT, Floating Control Signal, 95 Second Nominal Drive Time, 0/2-10Vdc Feedback, Declutch Manual Operation, Accepts 1/4″-1/2″ Square or 3/8″-5/8″ Round Damper Shafts, -5-140 Degree Ambient Temperature Range, 5-95% RH Operating Humidity Range, Includes Mounting Bracket, Screws, Shaft Adapter and Water Tight Strain Relief Cable Fittings
Product Specifications
| Application | HVAC |
| Dimensions (in.) | 5.23 in high x 2.60 in wide x 2.44 in deep |
| Dimensions (mm) | 134 mm high x 66 mm wide x 62 mm deep. |
| Includes | Mounting bracket, screws, shaft adapter, water-tight strain-relief cable fittings |
| Weight (lb) | 1 lb |
| Weight (kg) | 0.45 kg |
| Materials | Plenum rated plastic housing |
| Comments | Integral 1/2 in. NPSM conduit connection. |
| Item Type | Product |
| Mounting | Direct Coupled |
| Frequency | 50 Hz; 60 Hz |
| Approvals, Underwriters Laboratories Inc. | UL873, Plenum Rated |
| Tradeline Value | Tradeline |
| Electrical Connections | Enclosed screw terminal strip (22 to 14 AWG) |
| Operating Humidity Range (% RH) | 5 to 95% RH, non-condensing |
| Supply Voltage | 24 Vac +20%, -15%; 24 Vdc |
| Power Consumption | Driving– 5 VA |
| Shipping and Storage Temperature Range (F) | -22 F to +176 F |
| Shipping and Storage Temperature Range (C) | -30 C to +80 C |
| Approvals, CE | 89/336/ECC, 73/23/EEC |
| Approvals, Canadian Underwriters Laboratories Inc. | cUL C22.2 No. 24-93 |
| Ambient Temperature Range (F) | -5 F to +140 F |
| Ambient Temperature Range (C) | -20 C to +60 C |
| Approvals, C-Tick | N314 |
| Environmental, Electrical or Ingress Protection Rating | NEMA 2; IP54 |
| Internal Auxiliary Switch | 0 |
| Maximum Noise Rating | Driving (dB(A) @ 1m)– 35 |
| Stroke | 95 ±3 degrees |
| Shaft Dimensions (in.) | 1/4 to 1/2 in. square or 3/8 to 5/8 in. round |
| Actuator Type | Damper; Valve |
| Control Signal | Floating; (0)2-10 Vdc (4-20 mA w/500 ohm resistor); On/Off; SPDT |
| Fail Safe Mode | Non-Spring Return |
| Torque Rating (lb-in.) | 44 lb-in. |
| Torque Rating (Nm) | 5 Nm |
| Additional Torque Ratings (lb-in.) | Maximum Stall– 70 lb-in. |
| Additional Torque Ratings (Nm) | Maximum Stall– 8 Nm |
| External Auxiliary Switches Available | Yes, SSW2-1M |
| Rotation to Open | By switch |
| Rotational Stroke Adjustment | Dual Integral Adj. Stops (3 degree increments) |
| Timing, Nominal | Driving @ 60 Hz– 95 sec |
| Feedback | (0)2-10 Vdc (max. output: ±1.0 mA) |
| Shaft Adapter Type | U-bolt clamp |
| Manual operation | Declutch mechanism |
| Shaft Dimensions (mm) | 6 to 13 mm square or 8 to 16 mm round |
| Weight | 2 lbs |
|---|---|
| Dimensions | 9 × 6 × 4 in |
Be the first to review “MN7505A2001 Honeywell Damper Actuator”
You must be logged in to post a review.
Related Product(s)
Reviews
There are no reviews yet.