M9484F1031 Honeywell Modutrol Motor
M9484F1031 Honeywell Modutrol Motor, 24Vac, 135 Ohm input Signal, 150 Lb-In Torque, 2 Auxiliary Switches, 30 Second Timing for 90 Degree Stroke, 60 Second Timing for 160 Degree Stroke, Double Ended 3/8″ Shaft, -40-150 Degree Ambient Temperature Range
The Honeywell M9484F1031 Motor. Drives burner firing rate valves, dampers or auxiliary equipment. Proportional, reversing.
Overview
Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.
Features
- Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
- Vibration resistant electronic drive circuit.
- Regulated by three-wire proportional controller.
- Stroke is field-adjustable to 90 or 160 degrees.
Product Specifications
| Dimensions (in.) | 45 in high x 5.5 in wide x 7.3 in deep |
| Dimensions (mm) | 164 mm high x 140 mm wide x 185 mm deep |
| Item Type | Product |
| Frequency | 50 Hz; 60 Hz |
| Approvals, Underwriters Laboratories Inc. | Listed: File No. E4436, Guide No. XAPX for USA and Canada |
| Supply Voltage | 24 Vac |
| Power Consumption | 15 W |
| Timing | 90 degree stroke– 30 seconds, 160 degree stroke– 60 seconds |
| Ambient Temperature Range (F) | -40 F to +150 F |
| Ambient Temperature Range (C) | -40 C to +66 C |
| Input Signal | 135 ohm |
| Internal Auxiliary Switch | 2 |
| Auxiliary Switch Ratings | 120 Vac– 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac– 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact |
| Stroke | Adjustable; 90 to 160 degrees, Symmetrical |
| Shaft Dimensions (in.) | double-ended, 3/8 in. square |
| Torque Rating (lb-in.) | 150 lb-in. |
| Torque Rating (Nm) | 17 Nm |
| Additional Torque Ratings (lb-in.) | Breakaway– 300 lb-in. |
| Additional Torque Ratings (Nm) | Breakaway– 34.0 Nm |
| Auxiliary Switch Setting | 7 and 80 degrees |
| Factory Stroke Setting | 90 degrees |
| Shaft Dimensions (mm) | double-ended, 9.5 mm square |
| Deadweight Load on Shaft | Either End– 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts); |
| Weight | 7 lbs |
|---|---|
| Dimensions | 11 × 7 × 8 in |
Be the first to review “M9484F1031 Honeywell Modutrol Motor”
You must be logged in to post a review.
Related Product(s)
Reviews
There are no reviews yet.