M9484E1009 Honeywell Actuator Motor
$1,335.00
M9484E1009 Honeywell 150 lb-in, NSR, Proportional Flame Safeguard Firing Rate Motor, 1 Aux Switch 24V
M9484E1009 Honeywell flame safeguard Modutrol, 150 lb-in, NSR, Proportional Firing Rate Motor, 1 Aux Switch 24V. Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. ;Proportional Modutrol IV Motor, 24Vac, 135 Ohm input Signal, 75 Lb-In Torque, 1 Auxiliary Switch, 15 Second Timing for 90 Degree Stroke, 30 Second Timing for 160 Degree Stroke, Double Ended 3/8″ Shaft, -40-150 Degree Ambient Temperature Range
Overview
Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.
Features
- Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
- Vibration resistant electronic drive circuit.
- Regulated by three-wire proportional controller.
- Stroke is field-adjustable to 90 or 160 degrees.
Product Specifications
| Dimensions (in.) | 45 in high x 5.5 in wide x 7.3 in deep |
| Dimensions (mm) | 164 mm high x 140 mm wide x 185 mm deep |
| Item Type | Product |
| Frequency | 50 Hz; 60 Hz |
| Approvals, Underwriters Laboratories Inc. | Listed: File No. E4436, Guide No. XAPX for USA and Canada |
| Supply Voltage | 24 Vac |
| Power Consumption | 15 W |
| Timing | 90 degree stroke– 15 seconds, 160 degree stroke– 30 seconds |
| Ambient Temperature Range (F) | -40 F to +150 F |
| Ambient Temperature Range (C) | -40 C to +66 C |
| Input Signal | 135 ohm |
| Internal Auxiliary Switch | 1 |
| Auxiliary Switch Ratings | 120 Vac– 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac– 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact |
| Stroke | Adjustable; 90 to 160 degrees, Symmetrical |
| Shaft Dimensions (in.) | double-ended, 3/8 in. square |
| Torque Rating (lb-in.) | 75 lb-in. |
| Torque Rating (Nm) | 5 Nm |
| Additional Torque Ratings (lb-in.) | Breakaway– 150 lb-in. |
| Additional Torque Ratings (Nm) | Breakaway– 17.0 Nm |
| Auxiliary Switch Setting | 11 degrees |
| Factory Stroke Setting | 90 degrees |
| Shaft Dimensions (mm) | double-ended, 9.5 mm square |
| Deadweight Load on Shaft | Either End– 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts); |
Additional Information: Click Here
| Weight | 7 lbs |
|---|---|
| Dimensions | 10 × 6 × 8 in |
Be the first to review “M9484E1009 Honeywell Actuator Motor”
You must be logged in to post a review.
Related Product(s)
Reviews
There are no reviews yet.