CW2TP2A Veris Wall Air Quality Sensor

CO2 Measurement Accuracy	:	±30 ppm ±3% of measured value
CO2 Measurement Range	:	0 to 2000/5000 ppm (selectable)
CO2 Measurement Repeatability	:	±20 ppm ±1% of measured value
CO2 Measurement Resolution	:	1 ppm
CO2 Response Time	:	<60 seconds for 90% step change
CO2 Sensor Type	:	Non-dispersive infrared (NDIR), diffusion sampling
Color	:	Matte White
Communication Specifications	:	BACnet MSTP or Modbus via RS-485, selectable
Communication	:	Protocol
Display Resolution	:	240 x 300 px
Display Size	:	2.4 in (61 mm)
Display Type	:	LCD, Color, Backlit, Capacititve Touchscreen
Electrical Wiring Size	:	Screw terminals, 18-24 AWG
Enclosure Material	:	High impact ABS plastic
Humidity Calibration Certificate	:	Replaceable RH element available in 1% & 2% with NISTcalibration certificate
Humidity Measurement Accuracy	:	±2% from 10 to 80% RH @ 25°C (77 °F)
Humidity Measurement Linearity	:	Included in accuracy specification
Humidity Measurement Range	:	0 to 100% RH
Humidity Measurement Resolution	:	0.1% RH
Humidity Sensor Type	:	Thin-film capacitive, replaceable
IP Protection	:	IP20
Input Specifications	:	Class 2; 20 to 30 Vdc, 24 Vac, 50 to 60 Hz
Measurement Type	:	CO2 / RH / Temperature
Operating Humidity	:	0 to 95% RH non-condensing
Operating Temperature	:	0 to 50 °C (32 to 122 °F)
Output Specifications	:	Selectable 4 to 20 mA, 0 to 5 V, 0 to 10 V
Setpoint Range	:	Temperature: Scale: 0 to 50 °C (32 to 122 °F) max., adjustable span. Fan Speed: Off, Low, Med., High.
Setpoint Specifications	:	Temperature or fan speed (one setpoint type is selectable via dip switch)
Setpoint	:	Yes
Standards EMC	:	EN61000 Series – industrial immunity
Temperature Measurement Accuracy	:	±0.2 °C (±0.4 °F) typical
Temperature Measurement Range	:	0 to 50 °C (32 to 122 °F)
Temperature Measurement Resolution	:	0.1 °C (0.1 °F)
Temperature Sensor Type	:	Solid state, integrated circuit
Warranty	:	5 Years

The CW2 Protocol Series of air quality sensors for living space is a flexible multi-sensor platform for use with BAS controllers designed to accept BACnet or Modbus outputs. CW2 Protocol Series sensors feature no-logo on the faceplate and are available with three user interface options: touchscreen, LCD with three buttons and blank. CO2 and temperature sensors are included with all CW2 Protocol Series air quality sensors. Models with VOC sensors and relative humidity sensors are also available.

Installation guide	CW2 Protocol Series Wall Mounted Air Quality Sensors Installation Guide
Specification sheet	CW2 Protocol Series Air Quality Sensors Specification Sheet