C7012E1112 Honeywell Flame Detector
$3,500.00
UltraViolet Flame Detector, 120vac, 1″ NPT Mounting, Nema 4 Rated, Solid State Flame Detector For Use With Honeywell Flame Safeguard Controls, Used with Gas, Oil or Coal Fired Burners, 96″ Leadwires, -20/175 Degree Ambient Temperature, Dynamic Self Checking
1 in stock
The Honeywell C7012E1112 Flame Sensor, Ultraviolet. For use with Honeywell Flame Safeguard controls and amplifiers.
All models
- Solid-state electronic circuitry provides low power consumption and high reliability.
- Solid-state models directly replace previous models with vacuum electron tube circuitry.
- Detectors can be mounted horizontally, vertically or at any angle. The self-checking C7012E,F models require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.
- Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.
- Threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
- Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
- A swivel mount is available to facilitate flame sighting.
- Models are available with a -40°F (-40°C) rating.
C7012E, F
- Incorporate UV sensor tube checking feature; used with Honeywell Dynamic Self-Check (R7247C, R7847C) Flame Signal Amplifiers.
Product Specifications
| Application | Gas, Oil or Coal fired burners |
| Dimensions (in.) | 5 1/4 in. diameter (includes mounting flange) x 7 7/32 in. long |
| Dimensions (mm) | 133 mm diameter (includes mounting flange) x 183 mm long |
| Includes | Cast case and cover |
| Used With | Flame Amplifiers: R7247C, R7847C |
| Weight (lb) | 4.25 lb |
| Weight (kg) | 1.9 kg |
| Comments | Dynamic self-checking flame detector |
| Mounting | 1 in. NPT |
| Electrical Ratings | 120 Vac |
| Frequency | 50 Hz; 60 Hz |
| Approvals, Underwriters Laboratories Inc. | Listed: File No. MP268, Guide No. MCCZ |
| Approvals, Canadian Standards Association | Certified: Master Report LR95329-1 |
| Electrical Connections | 6 NEC Class 1 Color-coded lead wires. |
| Power Consumption | 7.0 W |
| Approvals, Swiss RE | Acceptable |
| Approvals, Factory Mutual | Approved: Report No. 14740.01 |
| Ambient Temperature Range (F) | -20 F to +175 F |
| Ambient Temperature Range (C) | -20 C to +79 C |
| NEMA Rating | NEMA 4 |
| Lead Length (in.) | 96 in. |
| Lead Length (mm) | 2438 mm |
| Weight | 5 lbs |
|---|---|
| Dimensions | 13 × 9 × 9 in |
Be the first to review “C7012E1112 Honeywell Flame Detector”
You must be logged in to post a review.
Related Product(s)
Reviews
There are no reviews yet.