MS-FEC2611-0 Johnson Controls Control

The Johnson Controls MS-FEC2611-0 field equipment control. 7 point 6 input.

Datasheet

Installation Guide

Catalog Page

The Field Equipment Controller (FEC) Series products are programmable controllers that can be switched between BACnet® MS/TP and N2 Communications protocols. When they are used as BACnet MS/TP devices, they are BACnet Application Specific Controllers (B-ASCs) with integral Master-Slave/Token-Passing (MS/TP) communications. In N2 mode, they can be used to modernize sites with legacy Johnson Controls® controllers.

FECs feature 32-bit microprocessor architecture, patented continuous tuning adaptive control, peer-to-peer communications, and are available with an optional built-in LCD screen local UI.

A full range of FEC models combined with the Input/Output Module (IOM) models can be applied to a wide variety of building applications ranging from simple fan coil or heat pump control to advanced central plant management. All FEC Series Controllers configured for BACnet support wireless communications using the ZFR System accessories

Features

• Switchable communications protocols between BACnet MS/TP and N2 protocols
• Standard BACnet Protocol – Provides interoperability with other Building Automation System (BAS) products that use the widely accepted BACnet standard.
• Standard Hardware and Software Platform – Uses a common hardware design throughout the family line to support standardized wiring practices and installation workflows. Also uses a common software design to support use of a single tool for control applications, commissioning, and troubleshooting to minimize technical training.
• ZFR Wireless Field Bus System (FC)/Sensor/Actuator (SA) Bus Interface – Provides a wireless alternative to hard-wired Metasys® system counterparts, providing application flexibility and mobility with minimal disruption to building occupants.
• Bluetooth® Wireless Commissioning Interface – Provides an easy-to-use connection to the configuration and commissioning tool.
• Auto Tuned Control Loops – Reduce commissioning time, eliminate change-of-season re-commissioning, and reduce wear and tear on mechanical devices.
• Universal Inputs, Configurable Outputs, and Point Expansion Modules – Allow multiple signal options to provide input/output flexibility.
• Optional Local User Interface Display – Allows convenient monitoring and adjusting capabilities at the local device.
• BACnet Testing Laboratories™ (BTL) Listing – Ensures interoperability with other BTL-listed devices. BTL is a third-party agency which validates that BAS vendor products meet the BACnet industry-standard protocol.
• 32-bit microprocessor ensures optimum performance and meets industry specifications.
• BACnet Automatic Discovery support enables easy controller integration into Metasys BAS.
• Integral end-of-line (EOL) switch enables field controller as a terminating device on the communications bus.
• Pluggable communications bus and supply power terminal blocks expedite installation and troubleshooting.
• Wireless capabilities via a ZFR1800 Series Wireless Field Bus System enable wireless mesh connectivity to supervisory controllers, facilitating easy initial location and relocation.
• Patented proportional adaptive control (P-Adaptive) and Pattern Recognition Adaptive Control (PRAC) technologies provide continuous loop tuning.
• Writable flash memory allows standard or customized applications to be downloaded from the Controller Configuration Tool (CCT) and enables persistent application data.
• Large product family provides a wide range of point mix to meet application requirements and allows for the addition of one or more IOMs and/or Network Sensors to provide even more I/O capacity.
• User-friendly graphic theme and clear push-button identification facilitate easy navigation of the integral or optional UI/display.