M9484F1007 Honeywell Actuator
$1,480.00
Proportional Modutrol IV Motor, 24Vac, 135 Ohm input Signal, 150 Lb-In Torque, 2 Auxiliary Switches, 30 Second Timing for 90 Degree Stroke, 60 Second Timing for 160 Degree Stroke, Double Ended 3/8″ Shaft, -40-150 Degree Ambient Temperature Range
2 in stock (can be backordered)
M9484F1007 Honeywell Actuator Datasheet
The Honeywell M9484F1007 Modutrol motor actuator wit 2 auxillary switches, 150 lb-in, NSR, Proportional Flame Safeguard Firing Rate, 24V
Honeywell M9484F1007 Modutrol IV Actuator – 24 V AC, 150 lb-in, Non-Spring Return
The Honeywell M9484F1007 is a heavy-duty Modutrol IV actuator engineered for accurate modulating control of dampers and valves in HVAC, boiler, and burner applications. Operating on 24 V AC and delivering 150 lb-in of torque, this actuator provides reliable positioning for demanding control applications that require smooth, precise movement.
Equipped with two internal auxiliary switches, the M9484F1007 supports advanced control logic, sequencing, and feedback integration with building automation and burner management systems. Its rugged construction and OEM-grade components make it a trusted solution for commercial, industrial, and institutional installations.
Features
• Genuine Honeywell M9484F1007 Modutrol IV actuator
• 24 V AC power supply
• High-torque output: 150 lb-in
• Non-spring-return design for powered positioning
• Two internal auxiliary switches for interlock or feedback control
• Designed for modulating damper and valve applications
• Rugged housing for long service life
• OEM-grade construction for reliable performance
Benefits & Applications
• Provides precise, smooth modulation for dampers and valves
• Ideal for HVAC systems, boilers, burners, and combustion controls
• Auxiliary switches support safety interlocks and control sequencing
• High torque rating allows use with larger or higher-load dampers and valves
• Suitable for new installations or replacement of existing Modutrol IV actuators
• Trusted by HVAC contractors, boiler technicians, and facility maintenance teams
Technical Specifications
| Dimensions (in.) | 6.45 in high x 5.5 in wide x 7.3 in deep |
| Dimensions (mm) | 164 mm high x 140 mm wide x 185 mm deep |
| Item Type | Product |
| Frequency | 50 Hz; 60 Hz |
| Approvals, Underwriters Laboratories Inc. | Listed: File No. E4436, Guide No. XAPX for USA and Canada |
| Supply Voltage | 24 Vac |
| Power Consumption | 15 W |
| Timing | 90 degree stroke– 30 seconds, 160 degree stroke– 60 seconds |
| Ambient Temperature Range (F) | -40 F to +150 F |
| Ambient Temperature Range (C) | -40 C to +66 C |
| Input Signal | 135 ohm |
| Internal Auxiliary Switch | 2 |
| Auxiliary Switch Ratings | 120 Vac– 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac– 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact |
| Stroke | Adjustable; 90 to 160 degrees, Symmetrical |
| Shaft Dimensions (in.) | double-ended, 3/8 in. square |
| Torque Rating (lb-in.) | 150 lb-in. |
| Torque Rating (Nm) | 17 Nm |
| Additional Torque Ratings (lb-in.) | Breakaway– 300 lb-in. |
| Additional Torque Ratings (Nm) | Breakaway– 34.0 Nm |
| Auxiliary Switch Setting | 7 and 80 degrees |
| Factory Stroke Setting | 90 degrees |
| Shaft Dimensions (mm) | double-ended, 9.5 mm square |
| Deadweight Load on Shaft | Either End– 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts); |
Applications
• HVAC damper control in air handling units
• Modulating valve control in hydronic systems
• Burner and boiler control systems
• Building automation and energy management systems
• Retrofit or replacement for existing Honeywell Modutrol IV actuators
Always verify torque requirements, voltage, and control compatibility before installation.
Installation & Use Notes
• Installation should be performed by qualified HVAC or controls professionals
• Verify 24 V AC supply and correct wiring before energizing
• Confirm auxiliary switch settings and wiring match control requirements
• Ensure proper coupling and alignment with damper or valve shaft
• After installation, cycle actuator to verify smooth modulation and correct switch operation
• Follow all applicable electrical and mechanical codes
Why Buy from APEX Controls
• OEM Honeywell Modutrol IV actuator — no aftermarket substitutes
• Proven reliability in HVAC, boiler, and burner control applications
• Ideal for contractors, service technicians, and facility maintenance teams
• Suitable for new installations and replacement projects
• Trusted source for genuine HVAC and control components
| Weight | 7 lbs |
|---|---|
| Dimensions | 7 × 10 × 8 in |
Be the first to review “M9484F1007 Honeywell Actuator”
You must be logged in to post a review.
Related Product(s)
Reviews
There are no reviews yet.