VM3212P33A000

1/2″ Swt, 3-Way, 50 PSI, 24V, Proportional, Non-Spring Return

Datasheet

Installation Guide

Selection Guide

Valve Assembly:

• Body Size: 1/2 in
• Configuration: 3-Way Mixing
• Type: Zone
• Connection: Sweat
• Material Trim: Brass
• Flow Coefficient: 2 cv
• Control Media: Glycol 25 to 60% and Water
• Product Line: Schneider Electric
• Product Range: Erie PopTop
• Product Series: VM3

Product Alert: Not for use with steam

• Close-Off Pressure: 50 PSI
• Actuator Type: Electric
• Control Signal: Proportional
• Control Signal Range: 0 to 10 VDC or 4 to 20 mAdc
• Loss of Power Type: Non-Spring Return
• Loss of Power Position: Fail in place
• Power Input Voltage: 24 VAC
• Leads and Connections: No Leads
• Mechanical Movement: Rotary
• Protection Rating: NEMA 1
• Assembly Components:
• Valve Body: VM3212
• Valve Linkage: None, tool-less connection
• Actuator: AP33A000
• Actuator Range: Erie PopTop

The Erie™ Modulating PopTop™ Series valve actuator assemblies are designed for closed hydronic heating and cooling systems. The Modulating PopTop is used to control fluid flow in fan coil units, VAV reheat, unit ventilators, AHUs and radiant applications.

The Modulating PopTop Proportional (P) type is compatible with any 0 to 10 Vdc or 4 to 20 mA signal with jumper selectable operating range and action resulting in precise positioning. The floating (T) type is compatible with any 24 Vac three-wire signal when three minute time-out logic resides in the valve actuator or system controller.

The Modulating PopTop valve assemblies allow the actuator to be snapped onto, or off from, the valve body. The actuator can be mounted after the valve body has been installed into the system without the need for linkages or calibration

Features

• Magnetic clutch to maximize the life of the motor and gear train
• Manual operating lever/position indicator facilitates field setup
• Easy to use lever terminal blocks
• Actuator can be installed after the valve body
• Three wire floating and 0 to 10 Vdc or 4 to 20 mA proportional available
• Spring return will return actuator to normal position when the power is lost for more than two minutes