R7824C1002 Honeywell Flame Amplifier
The Honeywell R7824C1002 3 SECOND Flame FAILURE RESPONSE TIME.
The Honeywell R7824C1002 3 SECOND Flame FAILURE RESPONSE TIME.
Overview
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Features
- Flame failure response time of 0.8 or 3.0 seconds (1.0 or 2.0 for CE approved devices).
- Flame signal strength ranges from 0.0 to 5.0 Vdc.
- Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
- Flame signal test jacks to measure amplifier flame signal voltage.
- Color-coded labels identify flame detection type.
- -Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system.
- -Ampli-check tests the amplifier and 7800 SERIES Relay.
- -None (standard) is just tested at normal system startup.
- 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
- Compatible with existing Honeywell flame detectors (order separately).
Product Specifications
Comments | Color: Green |
Approvals, Underwriters Laboratories Inc. | Listed: File No. MP268, Guide No. MCCZ |
Approvals, Canadian Standards Association | Certified: File No. LR95329-3 |
Customer Special | Flame Failure Response Time (sec) |
0 sec | Approvals, Control Safety Devices |
Approvals, Swiss RE | Acceptable |
Approvals, Factory Mutual | Approved: Report No. 1V9A0.AF |
Self Checking | Dynamic Self-Check |
Use With Primary Safety Control | RM7824 |
Use With Flame Sensor | C7024E, F Flame Detector |
Additional Information: Click Here
| Weight | 2 lbs |
|---|---|
| Dimensions | 4 × 6 × 2 in |
Be the first to review “R7824C1002 Honeywell Flame Amplifier”
You must be logged in to post a review.
Related Product(s)
Reviews
There are no reviews yet.